This Missouri City property required professional House Washing Missouri City TX services after green algae and black mildew streaking had spread extensively across the home’s exterior vinyl siding. The two-story home sat on a corner lot in an established Missouri City neighborhood, surrounded by mature trees on two sides that kept the north and west elevations in near-constant shade throughout the day.
That shade — combined with Missouri City’s year-round humidity and the home’s sprinkler system — had created ideal conditions for organic growth to establish and spread unchecked. What had started as faint green discoloration along the upper panels of the shaded elevations had grown over two seasons into full coverage algae that had crept to the front elevation and become clearly visible from the street.
The vinyl siding across the north and west faces had turned from its original light beige tone to a mottled green-gray. Black mildew streaks ran vertically down the panels beneath each window frame, following the path moisture took as it drained off window sills during rain. The lower panels near the foundation line showed the heaviest concentration of organic growth — the zone where lawn irrigation and soil moisture kept the siding surface persistently damp.
The front elevation, while less affected by algae, had its own contamination issue. Years of vehicle exhaust, airborne pollen, and fine road dust had bonded to the siding surface and shifted the color from a clean beige to a flat, grayish tone that made the home look weathered and older than its age. The front entry columns and shutters showed heavy oxidation — the chalky white residue that forms when UV exposure breaks down the outer layer of vinyl, leaving a powdery film that streaks and transfers on contact.
The brick foundation course at the base of the home had accumulated green algae in the mortar joints on the shaded sides. Efflorescence — white mineral deposits that rise to the brick surface as water evaporates — had appeared across several sections, adding to the overall appearance of neglect despite the homeowners’ careful lawn care and landscaping maintenance.
The homeowners had researched pressure washing but were correctly concerned about using high pressure on vinyl siding. Vinyl siding is vulnerable to high-pressure washing in several specific ways: water forced under the lapped panels creates moisture problems inside the wall cavity, high pressure can crack or warp panels, and it can strip caulking from around windows and trim that took significant effort and cost to properly seal.
Soft wash house washing is the correct and safe method for vinyl siding — and for any exterior surface where water intrusion is a risk. Rather than relying on mechanical force, soft washing applies a biodegradable cleaning solution at low pressure that penetrates and eliminates algae, mold, and mildew at the biological level. The organisms are killed at the source, not scrubbed from the surface. This produces results that last significantly longer than pressure washing, because it addresses the root cause rather than the visible symptom.
Raz N’ Shine applied our soft wash cleaning solution across the full exterior, beginning with the most heavily affected north and west elevations. We pre-treated the foundation line and lower panels where algae coverage was thickest, giving the solution extended dwell time in those areas to fully penetrate the heavy growth. The black mildew streaks beneath each window frame received targeted treatment before the broad application to ensure complete elimination.
We treated the front elevation with our full cleaning solution to remove the atmospheric grime and pollen film. The oxidized entry columns and shutters received our oxidation treatment — a separate process that removes the chalky UV-damaged layer and restores the vinyl’s original color and surface texture.
The brick foundation course was treated with a masonry-appropriate cleaning solution, and the efflorescence deposits received a diluted acidic treatment that dissolved the mineral deposits from the mortar joints without damaging the brick or surrounding surface.
After full dwell time across all elevations, we completed a thorough low-pressure rinse from the roofline to the foundation on each side. The cleaning solution and all biological material rinsed cleanly from every surface. The soffit and fascia boards were rinsed and cleared of any debris and mildew along the full roofline perimeter.
The results delivered a complete exterior transformation. The north and west elevations returned to their original light beige tone — every trace of green algae and black mildew was gone. The front elevation shed its grayish pollen film and returned to a clean, consistent color. The entry columns and shutters lost their chalky oxidation and looked sharp and freshly maintained. The brick foundation was clean and even, with mortar joints fully clear and the efflorescence completely removed.
The home looked like a different property from the street. Neighbors stopped to comment on the difference. The homeowners, who had been gradually accepting the deterioration as inevitable, were surprised at how complete the restoration was — and how much the cleaned exterior changed the overall impression of the home.
Services Performed:
- Full soft wash exterior house washing
- Green algae removal across all elevations
- Black mildew and streaking elimination
- Lower panel and foundation line extended treatment
- Atmospheric grime and pollen removal from front elevation
- Oxidation treatment on vinyl columns and shutters
- Brick foundation course cleaning
- Efflorescence removal from mortar joints
- Soffit, fascia, and roofline perimeter cleaning
- Low-pressure shingle-safe eave rinse
- Final quality inspection
Location: Missouri City, Texas
Is your home covered in algae, mildew streaks, or grime that makes it look older than it is? Raz N’ Shine’s soft wash house washing safely restores your exterior to its original condition. Contact Raz N’ Shine today for your free house washing estimate.
Project Image Gallery
